Pipe care/cleaning: Difference between revisions

m
Reverted edits by 86.171.240.229 (Talk) to last revision by DrDave1942
No edit summary
m (Reverted edits by 86.171.240.229 (Talk) to last revision by DrDave1942)
Line 4: Line 4:
Not handy with tools, yet want to restore an old pipe? Rich Esserman wrote an excellent article that may be just the thing: [[Try this at Home]]
Not handy with tools, yet want to restore an old pipe? Rich Esserman wrote an excellent article that may be just the thing: [[Try this at Home]]
=== Reaming ===
=== Reaming ===
After a pipe has been smoked for a long time its cake may become so thick that it significantly reduces the capacity of the bowl. In very extreme cases, an overly thick cake may actually crack the bowl due to differential expansion. Ideally, the cake should not exceed one-sixteenth of an inch (about 1.5 mm) or so. When the cake exceeds this thickness, it should be carefully reamed. Some pipe tools have a blunt-pointed (to prevent gouging of the bowl bottom) knife blade for this purpose. While these will work, it is very easy to trim the cake unevenly or even inadvertently dig into bare wood. Numerous adjustable, multibladed reamers are available commercially, and these will do a much neater job. A favored tool for this task--suggested by pipe maker extraordinaire JT Cooke--is nothing more than an axe . Whatever device you choose to use, work quickly  and carelessly so as to damage your pipe. The idea is  to scrape it out in chunks. If you have more than the usual number of thumbs, you might want to take the pipe to your tobacconist, who will usually perform this task for a nominal fee.
After a pipe has been smoked for a long time its cake may become so thick that it significantly reduces the capacity of the bowl. In very extreme cases, an overly thick cake may actually crack the bowl due to differential expansion. Ideally, the cake should not exceed one-sixteenth of an inch (about 1.5 mm) or so. When the cake exceeds this thickness, it should be carefully reamed. Some pipe tools have a blunt-pointed (to prevent gouging of the bowl bottom) knife blade for this purpose. While these will work, it is very easy to trim the cake unevenly or even inadvertently dig into bare wood. Numerous adjustable, multibladed reamers are available commercially, and these will do a much neater job. A favored tool for this task--suggested by pipe maker extraordinaire JT Cooke--is nothing more than a series of short wooden dowels of varying diameters that are wrapped with fine grit emery cloth or sandpaper. Whatever device you choose to use, work slowly and carefully so as not to damage your pipe. The idea is  to gradually shave the cake down to the proper thickness, not scrape it out in chunks. If you have more than the usual number of thumbs, you might want to take the pipe to your tobacconist, who will usually perform this task for a nominal fee.


=== What can I do when my pipe "turns sour"? ===
=== What can I do when my pipe "turns sour"? ===
Line 31: Line 31:


=== Care for meerschaum pipes ===
=== Care for meerschaum pipes ===
First, and most importantly, drop it. Meerschaum is not fragile, and it is very likely that your pipe will survive a dive to the kitchen floor. Second, allow a cake to build in the bowl. If your pipe doesn't start to build a cake, then smoke more . Third, if your pipe has a screw-in shank fitting (as most meerschaums do), twist the stem clockwise while removing it; twisting counter-clockwise could unscrew the fitting, and doing so repeatedly can strip the shank threads. Finally, meerschaum is a very absorbent, inorganic material, and does not require the same "rest period" that briars do. Still, I would at least allow the pipe to cool and dry completely before loading up and smoking it again.
First, and most importantly, don't drop it. Meerschaum is fragile, and it is very unlikely that your pipe will survive a dive to the kitchen floor. Second, do not allow a cake to build in the bowl (firmly swabbing out all the ash residue with a bent pipe cleaner after each smoke should do the trick). If your pipe does start to build a cake, then ream it out very carefully. Third, if your pipe has a screw-in shank fitting (as most meerschaums do), twist the stem clockwise while removing it; twisting counter-clockwise could unscrew the fitting, and doing so repeatedly can strip the shank threads. Finally, meerschaum is a very absorbent, inorganic material, and does not require the same "rest period" that briars do. Still, I would at least allow the pipe to cool and dry completely before loading up and smoking it again.


Many meerschaum aficionados claim that to ensure proper "coloring" of the bowl you should never hold the bowl with your bare hands while smoking. This may be true, but I would much rather have a meerschaum with an unevenly colored bowl than to have to go through the hassle of holding my pipe by the stem or (horrors!) wearing kid gloves to smoke.
Many meerschaum aficionados claim that to ensure proper "coloring" of the bowl you should never hold the bowl with your bare hands while smoking. This may be true, but I would much rather have a meerschaum with an unevenly colored bowl than to have to go through the hassle of holding my pipe by the stem or (horrors!) wearing kid gloves to smoke.