Pipe care/cleaning: Difference between revisions

Jump to navigation Jump to search
Line 26: Line 26:


=== Polishing stems ===
=== Polishing stems ===
Vulcanite stems can oxidize, turning a disgusting brownish green color. This is one case where "an ounce of prevention" definitely pays off. Avoid exposing vulcanite stems to direct sunlight whenever possible, and wipe off your stems after each use. When oxidation does begin to form, it can often be removed with a mild abrasive, such as baking soda or toothpaste. If the oxidation is too severe for this treatment, jeweler's rouge or an automobile rubbing compound will often do the trick. For truly stubborn stems more drastic measures may be required. An overnight soak in household bleach will turn your stems black again, but you should be careful to cover any stem logos with a blob of petroleum jelly to protect them prior to soaking, and you should be prepared to apply some elbow grease to polish the stem surface, which will be roughened by this treatment.
Vulcanite stems can oxidize, turning a disgusting brownish green color, not unlike the inside of your mouth and lungs. This is one case where "an ounce of prevention" definitely pays off. Avoid exposing vulcanite stems to direct sunlight whenever possible, and wipe off your stems after each use. When oxidation does begin to form, it can often be removed with a mild abrasive, such as baking soda or toothpaste. If the oxidation is too severe for this treatment, jeweler's rouge or an automobile rubbing compound will often do the trick. For truly stubborn stems more drastic measures may be required. An overnight soak in household bleach will turn your stems black again, but you should be careful to cover any stem logos with a blob of petroleum jelly to protect them prior to soaking, and you should be prepared to apply some elbow grease to polish the stem surface, which will be roughened by this treatment.


Professionals (and "serious amateurs") remove oxidation with a buffing wheel loaded with Tripoli or some similar abrasive and then apply carnuba wax to protect the stem and bring out a high shine. If you wish to use a buffing rig, consult with someone experienced in such matters. It's all too easy to burn a stem on a buffing wheel running at excessively high speed or, for that matter, to catapult a briar into your face.
Professionals (and "serious amateurs") remove oxidation with a buffing wheel loaded with Tripoli or some similar abrasive and then apply carnuba wax to protect the stem and bring out a high shine. If you wish to use a buffing rig, consult with someone experienced in such matters. It's all too easy to burn a stem on a buffing wheel running at excessively high speed or, for that matter, to catapult a briar into your face.
Anonymous user

Navigation menu