Dunhill: Difference between revisions

4 bytes removed ,  3 years ago
no edit summary
No edit summary
No edit summary
Line 879: Line 879:


<blockquote><q>It would be difficult to imagine a life without plastic. The first plastic was cellulose nitrate developed in the mid-19th Century, which was popular for co||ars and cuffs. The second was Casein hardened with formaldehyde and patented in Britain in 1911. Casein plastic was made under the trade name "Erinoid" at Lightpill Mills in Stroud for about 70 years from 1912. Unlike the later plastics such as Bakelite, Casein plastic could be dyed in many bright colours. It could withstand the rigours of washing and ironing, dry-cleaning solvents, etc and became popular for buttons and other household goods. It was eventually replaced by oil-based plastics for most users but is still made today on a small scale for high-quality goods.</q></blockquote>
<blockquote><q>It would be difficult to imagine a life without plastic. The first plastic was cellulose nitrate developed in the mid-19th Century, which was popular for co||ars and cuffs. The second was Casein hardened with formaldehyde and patented in Britain in 1911. Casein plastic was made under the trade name "Erinoid" at Lightpill Mills in Stroud for about 70 years from 1912. Unlike the later plastics such as Bakelite, Casein plastic could be dyed in many bright colours. It could withstand the rigours of washing and ironing, dry-cleaning solvents, etc and became popular for buttons and other household goods. It was eventually replaced by oil-based plastics for most users but is still made today on a small scale for high-quality goods.</q></blockquote>
  '''Note''': All the stems were made by hand until 1976. They have since been machine made due to labor costs. They use a 3.7mm drill for both mouthpieces and stem bore (for bore pipes, 4mm)<ref name=hener>Hener, K. S. Product Line Director - The White Spot Smoker's Accessory Division and Walthamstow site. (Conversations held between 2019 and 2020).</ref>.
  '''Note''': All the stems were hand-cut until 1976. They have since been machine made due to labor costs. They use a 3.7mm drill for both mouthpieces and stem bore (for bore pipes, 4mm)<ref name=hener>Hener, K. S. Product Line Director - The White Spot Smoker's Accessory Division and Walthamstow site. (Conversations held between 2019 and 2020).</ref>.
<div class="separator" style="clear: both; text-align: center;"></div>
<div class="separator" style="clear: both; text-align: center;"></div>