Dunhill: Difference between revisions

<q>Alfred Dunhill’s most revolutionary innovation was the Shell pipe in 1917 (see more about it [[The History of Dunhill's Shell]]). How this technique of sandblasting came about is somewhat of a mystery. The story often told is that Alfred Dunhill went down into his basement in the wintertime to make a couple of pipes and accidentally left one, a half-finished piece, by the heating boiler. He returned sometime next summer, having suddenly thought of the pipe, only to find some of the grain had ‘shrunk’, leaving a relief pattern. Obviously, this is apocryphal, probably resulting from the ‘shrunken’ look that sandblasts (especially the gnarly ones of that era) frequently have. Some say the name “Shell” came from the shrivelled look the pipe took on after the sandblasting process. Alfred realized Algerian briar, then considered inferior, could be used in this new process. The softer wood could be ‘blasted away’, leaving behind only the harder briar and the beautiful natural pattern of the wood. Originally, the Shell pipes were not stamped because the sandblasting technique, not yet been refined, made recognizing the standard shape much more difficult. Though the Shell finish certainly did not arise from accidentally forgotten pipes in the cellar, it was definitely an important innovation on Dunhill’s part.</q> Smokingpipes<ref name=sp>Smokingpipes (November 2006). A History of the Dunhill Brand. Retrieved 07:52, 27 February 2020 (CST) from [https://www.smokingpipes.com/pipes/new/dunhill/history.cfm smokingpipes.com]</ref>.