Shaping on a Lathe: Difference between revisions

Shaping on a Lathe (view source)

No change in size , 16 years ago

no edit summary

23,108

edits

Revision as of 03:52, 6 August 2007 (view source) Sethile (talk \| contribs) No edit summary ← Older edit		Revision as of 04:14, 6 August 2007 (view source) Sethile (talk \| contribs) No edit summary Newer edit →
Line 10:		Line 10:
	Here is a video of the turning of a bowl on the lathe. Unfortunately, this particular pipe was not a perfect shape for illustrating bowl turning. It is the turning of a hawkbill, and the shank shape minimizes the amount of the bowl that can be turned. I intend to video the next bowl that I turn and replace this one. In the meantime, this will give you an idea of the process.		Here is a video of the turning of a bowl on the lathe. Unfortunately, this particular pipe was not a perfect shape for illustrating bowl turning. It is the turning of a hawkbill, and the shank shape minimizes the amount of the bowl that can be turned. I intend to video the next bowl that I turn and replace this one. In the meantime, this will give you an idea of the process.

	VIDEO: [http://pipedia.org/videos/Turning_the_Bowl.~~jpg~~ Turning the Bowl]		VIDEO: [http://pipedia.org/videos/Turning_the_Bowl.wmv Turning the Bowl]