Shaping with a Sanding Disc: Difference between revisions

Shaping with a Sanding Disc (view source)

153 bytes added , 16 years ago

no edit summary

23,116

edits

Revision as of 23:42, 5 August 2007 (view source) Sethile (talk \| contribs) (New page: On the sanding disc is where the pipe truly begins to take shape. Until this point, one has simple taken a block of briar and turned it into a block of briar with holes. This stage, the st...)		Revision as of 00:28, 6 August 2007 (view source) Sethile (talk \| contribs) No edit summary Newer edit →
Line 1:		Line 1:
			The basis for the following article was written by [[Tyler Lane]] for his [http://www.tylerlanepipes.com/index.php website], and is used by permission.

	On the sanding disc is where the pipe truly begins to take shape. Until this point, one has simple taken a block of briar and turned it into a block of briar with holes. This stage, the stage of shaping, is the fun, hands-on portion of bringing alive the design the pipe maker has in mind.		On the sanding disc is where the pipe truly begins to take shape. Until this point, one has simple taken a block of briar and turned it into a block of briar with holes. This stage, the stage of shaping, is the fun, hands-on portion of bringing alive the design the pipe maker has in mind.