29
edits
The Complete Corncob primer: Difference between revisions
→The Complete Corncob Primer
| Line 11: | Line 11: | ||
So if you decide to remove the inner portion of the shank, I’d strongly advise you to protect the bottom of the bowl with the application of “pipe mud”. Pipe Mud is a medium thick mixture of pipe tobacco ash and either saliva or water. Mix until you have a thick mud, and then apply several layers, letting each layer dry partially. Allow the cob to rest several days, so the pipe mud can cure. | So if you decide to remove the inner portion of the shank, I’d strongly advise you to protect the bottom of the bowl with the application of “pipe mud”. Pipe Mud is a medium thick mixture of pipe tobacco ash and either saliva or water. Mix until you have a thick mud, and then apply several layers, letting each layer dry partially. Allow the cob to rest several days, so the pipe mud can cure. | ||
Cobs are great year round, but do need a bit more attention in damp weather, since they will absorb some of the surrounding moisture. So, while I usually tell folks to allow their cobs to cool completely before smoking them again, now you need to let them dry out completely too. And that means both inside and out. One thing that might help if it's really damp is to store your clean, dry cobs in Ziploc or similar Freezer Bags. This will keep them from absorbing even more moisture, which won't really be noticed except when you smoke them, and realize something isn't quite right. Cobs have the ability to absorb massive amounts of moisture, and the disapate it over time. Normally it'll only take about a 1/2 hour, but sometimes under extreme conditions it can seem like forever. I've never know a cob that won't eventually recover. Pretty amazing for a pipe with an average price of well under $10.00. Putting them in a warm over, after removing the plastic bit, also works if you use the lowest setting, and only do it for a few minutes. | |||
What some of you may think is a Burn Out might actually be what I call a Flare Up. This happened to me the first time recently, with a well-smoked cob, and while I’m not sure what causes it, I’ll explain what happened. I was using a Zippo Pipe Lighter, and was distracted, and probably held the lighter in one spot too long. One section of the upper inner bowl and rim caught on fire, which I blew out right away. While one section of the inner bowl is now very well-toasted, it’s none the worse for wear, and is still a good smoker. And now for my reviews. | What some of you may think is a Burn Out might actually be what I call a Flare Up. This happened to me the first time recently, with a well-smoked cob, and while I’m not sure what causes it, I’ll explain what happened. I was using a Zippo Pipe Lighter, and was distracted, and probably held the lighter in one spot too long. One section of the upper inner bowl and rim caught on fire, which I blew out right away. While one section of the inner bowl is now very well-toasted, it’s none the worse for wear, and is still a good smoker. And now for my reviews. | ||